 |
 |
|||
 |
 |
 |
 |
|
|
|
 |
Protimeter Accessories
Home: > Our Products: > Protimeter Accessories
In need of accessories for your Protimeter Meter? What type of meter do you own?
Mini
- (BLD5020) Deep Wall Probe - 9" (240mm):
The Protimeter insulated 'Deep Wall Probes' measure moisture at depth in walls and other structures regardless of surface dampness or contamination.
Back to top
- (BLD5070) EIFS Probe:
The Protimeter EIFS Probe has 4" (100mm) long replaceable needles. The needles are insulated and will only take measurements at the tip enabling the user to make profile measurements. Connects to all Protimeter pin type and ideal for measurements in Exterior Insulation Finishing Systems.
Back to top
- (BLD5060) Heavy duty two pin moisture probe and lead:
Heavy duty two pin moisture probe and lead The Protimeter 'Heavy Duty Moisture Probe and Lead' can be used with any Protimeter pin moisture meter and is designed for the measurement of moisture in awkward corners and hard to reach areas.
Back to top
- (BLD5018) Deep Wall Probes - 5" (127mm)
The Protimeter insulated 'Deep Wall Probes' measure moisture at depth in walls and other structures regardless of surface dampness or contamination.
Back to top
- (BLD5296) Hammer Electrode needles
Hammer Electrode needles for BLD5055 - pack of 10
Back to top
- (BLD5079) Two pin moisture probe and lead:
Fits all Protimeter pin type moisture meters.
Back to top
- (BLD5086) Calcheck device:
Allows the checking of pin function to be verified. Readings between 17 and 19% are normal. Two spare 1" (22mm) needles are included
Back to top
- (BLD5055 ) Heavy Duty Protimeter Hammer Electrode:
This heavy duty Protimeter Hammer Electrode is designed for making measurements in wood and wood structures such as wooden floors and timber stock. The Hammer Electrode has pin-electrodes with insulated shanks so measurements are taken at the tip only allowing measurements at different depth. Measures moisture to a depth of 1.38 in (35 mm). Weight 3.25 lbs.
Back to top
- (BLD0529) Hammer Electrode needles:
Hammer Electrode needles for BLD5000 - pack of 10
Back to top
Hygromaster
- (BLD4750C) Hygrostick Pack:
Pack of 5 Hygrometer probes to measure RH and ambient temperature. Calibration certificate (BLDCERT) should be ordered seperately if required.
Back to top
- (POL4750) Hygrostick:
The Hygrostick is a single replacement hygrometer probe for use with the Protimeter MMS and Hygromaster to measure %rh and ambient temperature. Ideal for rh test in concrete slabs and general applications. 30 -100 % RH range. Traceable Certificate available (BLDCERT).
Back to top
- (POL8750) QuikStick Interchangeable QuikStick™ Probe:
Range 0-100 fast responding. For use with MMS with firmware version 3.15 or higher and Hygromaster/Hygrohawk with firmware 5.22 or higher. Ideal for low relative humidity applications. Traceable certificate available (BLDCERT).
Back to top
- (BLDCERT) NIST Traceable Certificate:
Certify your Hygrostick probe to national traceable standards. Test at ambient temperature, 30, 50 and 80% rh. Order one certificate per probe
Back to top
- (BLD4750HS-020) Humidity Sleeves - 20 Pack:
20 pack of Humidity Sleeves available for measurement of RH% in concrete slabs (new style: 75mm length x 12mm dia). 12mm concrete drill bit (BLD12DR) available (USA only)
Back to top
- (BLD4750HS-050) Humidity Sleeves - 50 Pack:
50 pack of Humidity Sleeves available for measurement of RH% in concrete slabs (new style: 75mm length x 12mm dia). 12mm concrete drill bit (BLD12DR) available (USA only)
Back to top
- (BLD4750HS-100) Humidity Sleeves - 100 Pack:
100 pack of Humidity Sleeves available for measurement of RH% in concrete slabs (new style: 75mm length x 12mm dia). 12mm concrete drill bit (BLD12DR) available (USA only)
Back to top
- (BLD5802) Hygrostick/Humistick extension lead:
30" (76cm) long. Allows easier measurement in concrete floors, HVAC ducts and other hard to reach areas.
Back to top
- (BLD7710-080) Surface temperature sensor :
Range 32-122 deg F (0-50 deg C). Allows determination of surface temperature and proximity to dew point
Back to top
- (BLD12DR) 12mm Concrete Drill bit:
for BLD4750HS Sleeves
Back to top
- (BLD4902) Humidity Sleeves:
20 pack of Humidity Sleeves for measurement of RH% in concrete slabs (slotted style: 43mm length x 16mm dia.) Requires 5/8" (16mm) concrete drill
Back to top
- (BLD4711) Humidity Box:
Allows surface humidity test of %rh on concrete slabs. Complies with B_S_8201/8203(UK).
Back to top
MMS
- (BLD5018) Deep Wall Probes - 5" (127mm):
The Protimeter insulated 'Deep Wall Probes' measure moisture at depth in walls and other structures regardless of surface dampness or contamination
Back to top
- (BLD5020) Deep Wall Probes - 9" (240mm):
The Protimeter insulated 'Deep Wall Probes' measure moisture at depth in walls and other structures regardless of surface dampness or contamination.
Back to top
- (BLD5060) Heavy duty two pin moisture probe and lead:
The Protimeter 'Heavy Duty Moisture Probe and Lead' can be used with any Protimeter pin moisture meter and is designed for the measurement of moisture in awkward corners and hard to reach areas.
Back to top
- (BLD5086) Calcheck device (WME):
Allows the checking of pin function to be verified. Readings between 17 and 19% are normal. Two spare 1" (22mm) needles are included
Back to top
- (BLD5055) Heavy Duty Protimeter Hammer Electrode (WME):
The heavy duty Protimeter Hammer Electrode is designed for making measurements in wood and wood structures such as wooden floors and timber stock. The Hammer Electrode has pin-electrodes with insulated shanks so measurements are taken at the tip only allowing measurements at different depth. Measures moisture to a depth of 1.38 in (35 mm). Weight 3.25 lbs (1.5kg).
Back to top
- (BLD5070) EIFS Probe:
The Protimeter EIFS Probe has 4" (100mm) long replaceable needles. The needles are insulated and will only take measurements at the tip enabling the user to make profile measurements. Connects to all Protimeter pin type meters and ideal for measurements in Exterior Insulation Finishing Systems.
Back to top
- (BLD5950) 4 point resistance checkbox
Checkbox for all Protimeter pin moisture meters - supplied with Calibration certificate
Back to top
- (POL4750) Hygrostick:
The Hygrostick is a single replacement hygrometer probe for use with the Protimeter MMS and Hygromaster to measure % rh and ambient temperature. Ideal for rh test in concrete slabs and general applications. 30 -100 % rh range. Traceable Certificate available (BLDCERT).
Back to top
- (POL8750) QuikStick Interchangeable QuikStick™ Probe:
Range 0-100 fast responding. For use with MMS with firmware version 3.15 or higher and Hygromaster/Hygrohawk with firmware 5.22 or higher. Ideal for low relative humidity applications. Traceable certificate available (BLDCERT).
Back to top
- (BLD4750C) Hygrostick Pack:
5 Hygrosticks for use with MMS and Hygromaster. Traceable certificate available.
Back to top
- (BLDCERT) NIST Traceable Certificate:
Certify your Hygrostick or Humistick probe to national traceable standards. Test at ambient temperature 30, 50 and 80% rh. Order one certificate per probe.
Back to top
- (BLD4750HS-020 ) Humidity Sleeves - 20 pack:
20 pack of Humidity Sleeves available for measurement of rh% in concrete slabs (to ASTM F2170: 75mm length x 12mm dia). 12mm concrete drill bit (BLD12DR) available (USA only)
Back to top
- (BLD4750HS-050 ) Humidity Sleeves - 50 pack:
50 pack of Humidity Sleeves available for measurement of rh% in concrete slabs (to ASTM F2170: 75mm length x 12mm dia). 12mm concrete drill bit (BLD12DR) available (USA only)
Back to top
- (BLD4750HS-100 ) Humidity Sleeves - 100 pack:
100 pack of Humidity Sleeves available for measurement of rh% in concrete slabs (to ASTM F2170: 75mm length x 12mm dia). 12mm concrete drill bit (BLD12DR) available (USA only)
Back to top
- (BLD5802) Hygrostick/Humistick extension lead:
30" (76cm) long. Allows easier measurement in concrete floors, HVAC ducts and other hard to reach areas
Back to top
- (BLD4902) Humidity Sleeves:
20 pack of Humidity Sleeves for measurement of rh% in concrete slabs (slotted style: 43mm length x 16mm dia.) Requires 5/8" (16mm) concrete drill
Back to top
- (BLD4711) Humidity Box:
Allows surface humidity test of %rh on concrete slabs
Back to top
Timbermaster
- (BLD5018) Deep Wall Probes - 5" (127mm):
The Protimeter insulated 'Deep Wall Probes' measure moisture at depth in walls and other structures regardless of surface dampness or contamination
Back to top
- (BLD5070) EIFS Probe:
The Protimeter EIFS Probe has 4" (100mm) replaceable needles. The needles are insulated and will only take measurements at the tip enabling the user to make profile measurements. Connects to all Protimeter pin type meters and ideal for measurements in Exterior Insulation Finishing Systems.
Back to top
- (BLD5060) Heavy duty two pin moisture probe and lead:
The Protimeter 'Heavy Duty Moisture Probe and Lead' can be used with any Protimeter pin moisture meter and is designed for the measurement of moisture in awkward corners and hard to reach areas.
Back to top
- (BLD5079) Two pin moisture probe and lead:
Fits all Protimeter pin type moisture meters.
Back to top
- (BLD5086) Calcheck device:
Allows the checking of pin function to be verified.. Readings between 17 and 19% are normal. Two spare 1" (22mm) needles are included
Back to top
- (BLD5055) Protimeter Hammer Electrode:
Protimeter Hammer Electrode is designed for making measurements in wood and wood structures such as wooden floors and timber stock. The Hammer Electrode has pin-electrodes with insulated shanks so measurements are taken at the tip only allowing measurements at different depth. Measures moisture to a depth of 1.38 in (35 mm). Weight 3.25 lbs (1.5kg).
Back to top
- (BLD5059) Temperature sensor:
Allows temperature measurement in wood and automatic temperature compensation when used in conjunction with the Protimeter TimberMaster
Back to top
Psyclone
- (BLD7710-080) Surface temperature sensor:
Range 32-122 deg F (0-50 deg C). Allows determination of surface temperature and proximity to dew point
Back to top
- (BLDCERT) NIST Traceable Certificate:
Certify your Hygrostick or Humistick probe to national traceable standards. Test at ambient temperature 30, 50 and 80% rh. Order one certificate per probe.
Back to top
Grainmaster
- (GRN3005) Moisture and Temperature Probe - 4' (1.5m):
Allows rapid evaluation in bulk crops. Calibrations can be synchronized with the Grainmaster i grind and compress function. Readings are for guidance and should not be considered definitive. .
Back to top
- (GRN6046) Fast Response Temperature Probe 1m length:
Back to top
- (GRN6138) Baleprobe - 600mm length:
Back to top
- (GRN6005) Grinder-Compressor unit:
Back to top
- (GRN6004) Grinder blade & plastic feeder ring:
Replacement components for Grinder-Compressor unit (GRN6005)
Back to top
Hay And Straw Bale Moisture Meter
- (GRN6148) Replacement Bale Probe:
Measurement range: 9% - 40%. 24"(600mm) length
Back to top
BLD5020
BLD5070
BLD5060
BLD5018
BLD5296
BLD5079
BLD5086
BLD5055
BLD0529
BLD4750C
POL4750
POL8750
BLDCERT
BLD4750HS
BLD4750HS
BLD4750HS
BLD5802
BLD7710
BLD12DR
BLD4902
BLD4711
BLD5018
BLD5020
BLD5060
BLD5086
BLD5055
BLD5070
BLD5950
POL4750
POL8750
BLD4750C
BLDCERT
BLD4750HS
BLD4750HS
BLD4750HS
BLD5802
BLD4902
BLD4711
BLD5018
BLD5070
BLD5060
BLD5079
BLD5086
BLD5055
BLD5059
BLD7710
BLDCERT
GRN3005
GRN6046
GRN6138
GRN6005
GRN6004
GRN6148
Home | Our Products | FAQs | New Products | Downloads | Contact Us | Useful Links
Email: rob@moisturemeters.co.nz
FREE Phone: 0800 213 343 Fax: 03 347 7243
Address: 1078 Newtons Road, RD5, West Melton, Christchurch, New Zealand.
