 |
 |
|||
 |
 |
 |
 |
|
|
|
 |
Delmhorst Accessories
Home: > Our Products: > Delmhorst Accessories
In need of accessories for your Delmhorst Meter? What type of meter do you own?
Hay / Silage
- (1235) 10" Prod:
Used for testing standard bales. Attaches directly to the connector on top of the meter.
Back to top
- (1986) Bale Sensor:
For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000. Also available as 1986/40 with 40’ cable for larger balers.
Back to top
- (831) Short pin prod:
For testing hay in the windrow (requires H-4 Handle).
Back to top
- H-4 Handle:
Mounts to the connector on the top of any meter to use the #830 series #831 prods. This arrangement is recommended over the #1235 when testing any high density or larger bales to minimize stress placed on the meter case.
Back to top
- 830-2 / 830-3 / 830-4:
830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle.
830-3: 18" Prod - for testing hay in large bales or round bales. Use with H-4 Handle.
830-4: 36" Prod - for testing hay in large bales or round bales. Use with H-4 Handle.
Back to top
- 324CAS-0065 Carrying Case:
May be ordered separately. The case fits all components shown above. Will not hold the 1986 bale sensor or the #830-3 and #830-4 prods.
Back to top
Leather:
- 4 - E:
Use with the JL-2000 for demanding applications. Comes with #2497/A-100 contact pins for 5/16” penetration.
Back to top
Paper:
- H-4 / 830-2:
Electrode handle and 10" coaxial prod for measuring moisture content in bales.
Back to top
- 2 - E:
Pin type, maximum penetration 5/16". Used on curved surfaces such as cardboard and paper tubes especially if of small diameter.
Back to top
- 15 - E:
Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block.
Back to top
- 19 - E:
Blade type for measuring of paper on skids. Blades are 5" long. Longer blades available on special order.
Back to top
- 43 - E:
Clamp type for testing thin sheet stock. The sample tested is compressed between two smooth discs.
Back to top
- 55 - E:
Leaf type for measuring moisture content on a moving web or roll. Can be used with a portable unit or for stationary installation.
Back to top
- 12 - E:
Double roller type for measuring moisture content on a moving web.
Back to top
(1235) 10" Prod
(1986) Bale Sensor
(831) Short pin prod
H-4 Handle
830-2/830-3/830-4
324CAS-0065 Carrying Case
4-E
H-4 / 830-2
2-E
15-E
19-E
43-E
55-E
12-E
Home | Our Products | FAQs | New Products | Downloads | Contact Us | Useful Links
Email: rob@moisturemeters.co.nz
FREE Phone: 0800 213 343 Fax: 03 347 7243
Address: 1078 Newtons Road, RD5, West Melton, Christchurch, New Zealand.
